Locate Your Part Serial Number
Having your equipment or part serial number ready helps the Glasvan Parts team identify the right replacement and make sure your request is matched to the correct equipment. Serial number locations vary by manufacturer, so we’ve pulled the information together in one place to make it easier to find.
Use the manufacturer directory below to find your equipment or part manufacturer, then open the corresponding section for guidance on where to locate the serial number. Once you have it, you’ll be ready to submit your parts request.
Where To Look
Locate the Maxon serial plate on the liftgate. Depending on the model, the serial number may be found on the liftgate’s main frame, including the closing arm or inside the power pack cover. Some models also have the serial number stamped into the mounting flange.
HLF / WDV / MDV
Where To Look
The WALTCO serial number is located on the machine’s printed specification tag on the passenger side of the liftgate. The tag also includes the model name, rated capacity, and date of manufacture.
Specification tag location for Waltco HLF models
Specification tag location for Waltco HLF models
Where To Look
Locate the identification tag on the suspension or trailer axle. Tag locations vary by Hendrickson suspension and axle system, so use the applicable equipment illustration to identify the correct location.
Where To Look
The Whiting serial number tag is located on the interior face of the top panel of the door. The serial number allows Whiting to reference the original engineering information for the specific door.
Where To Look
There are two locations where you might be able to find the serial #.
- Outside mount: bottom panel, roadside
- Inside mount: top panel, roadside
Where To Look
The TODCO serial number is on a tag attached to the inside of the roll-up door, near the upper section of the door.
TODCO’s current FAQ identifies the upper road-side corner, while its ordering documentation identifies the tag on the inside of the door near the top panel.
Walk Ramp
For TODCO walk ramps, the serial number is located on a tag attached to the left side rail, close to the handles.
Where To Look
The identification plate, which lists the model number and serial number, is located on the front of the frame of Landoll trailers.
Where To Look
The Certification plate shows the serial number of the trailer, the vehicle and axle gross weights, the VIN number and a condensed description of the unit.
A typical model number, such as 241, would describe the following trailer:
2(A) 41(B)
where “A” is the # of axles and “B” is the nominal length of the trailer.
Unit Nameplate or Certification Label
The unit serial number plate or certification label is located on the left hand side of the trailer forward of the landing gear leg. The nameplate or certification label must remain permanently affixed to the unit.
(See Figure 1)
Serial Number Data
The unit serial number on the certification label is also stamped on a metal plate located on the left side of frame near the kingpin and on the outside frame member at the left hand forward corner of the frame. (See Figure 1).
NOTE: The complete serial number must be identified when ordering parts.
Keep Your Equipment Moving
The right part can help keep good equipment in service longer.
Keep your serial number with your equipment records to make future parts, maintenance, and service requests easier.
The Parts You Need with the Expertise to Match
From identification to sourcing, our Parts Experts can help with trailer, liftgate, and shunt truck parts. Complete the form below and we’ll be in touch within 1 hour, Monday to Friday, from 9 a.m. to 5 p.m. EST. Or call 1.888.GLASVAN.
Parts Manager
"*" indicates required fields
By submitting this form, you grant permission for Glasvan Great Dane to contact you. You also grant permission for Glasvan Great Dane to send electronic communications to you. You may unsubscribe from electronic communications from us at any time. By submitting this form, I am agreeing to the Glasvan Great Dane Privacy Policy.